| Topic: Eye Protection | |
| Date Issued: May 1, 2000 | Date Revised: |
We know seeing is important. Still, it’s surprising how many jobs we do without protecting our eyes.
On constructions sites, eye hazards are everywhere:
We’ve all had dust and dirt in our eyes. Some of us have even been hit in the eye by chips of wood, concrete or stone.
A little bigger and faster and these particles can leave us with limited or no eyesight!
Eye protection is the answer. Sure, you may have problems getting used to it at first. But eye protection can keep you from losing your sight and your ability to do your job.
Safety glasses with side shields offer basic protection. If you already wear glasses, then get prescription safety glasses with side shields. They’ll fit and feel like your regular glasses.
If you don’t wear glasses, you can buy safety glasses from your local safety equipment supplier or from an optician. Using them is like looking through a window, if they’re properly fitted.
Your frames and lenses must meet CSA Standard CAN/CSA Z94.3-92 Industrial Eye and Face Protectors.
Safety glasses with side shields are the only ones recommended (although glasses without side shields may be appropriate for certain work situations).
Side shields protect your eyes from particles entering at the side and top of your glasses. The best shields are permanently attached to the frames.
If your safety glasses are fitted properly and your lenses are properly maintained, your sight should not be blurry or distorted. If your head aches or your eyes get tired, you may have a vision problem that requires prescription lenses.
[Where applicable, review the company policy on the provision and replacement of safety eyewear.]
Some jobs require more than safety glasses with side shields. Remember – the protection should always match the hazard! Safety glasses that protect you from dust may not protect you from splash or radiation.
You should keep your glasses on even when wearing other protection, such as a welding helmet or face shield. Why? Because when you lift up the visor or shields, you may still be exposed to flying chips, dust or other eye hazards.
[Review any special requirements for your crew – welding helmets, sandblasting hoods, face shields, etc.]
Get your eyes checked every year to ensure no problems have developed.
We only have one pair of eyes, it pays to protect them. Make a point to wear your safety glasses as soon as you set foot on the job site.
[Take a look at any eye protection currently used by crew. Talk about jobs on the project where eye protection should be worn.]
In New Brunswick, the main provisions on eye protection can be found in General Regulation 91-191 under the Occupational Health and Safety Act, sections 38 and 39. Other sections referring to eye protection include sections 11, 35(2)(3), 36(f), 89(i) and 254(2).